The material for this SCRM was prepared by Replicast Ltd. at Sheffield, U.K using a special method of casting known to provide material of uniform composition in a form suitable for use as a Certified Reference Material (CRM) for optical emission spectrometric analysis. Blocks from this cast have been shown, by statistically designed procedures, to provide reproducible results using optical emission spectrometry. SCRM 674/1 is sold in the form of chill cast rectangular blocks, each approximately 48mm x 42mm x 12mm thick with a single chilled working face. Spectroscopic reproducibility has been shown to be reliable to a depth of 5mm below the original surface of this block. Sparking must be made on the fully ground surface only and the sample should be discarded when this face has been ground back as far as the small shoulder around the edge of the sample. The preparation of representative samples for chemical analysis and the certification by co-operative analysis was undertaken by Bureau of Analysed Samples Ltd. Bureau of Analysed Samples Ltd is a United Kingdom Accreditation Service (UKAS) Accredited Reference Material Producer, No 4004, and, as the Producer of SCRM 674/1 as defined in ISO Guide 34:2009 section 3.1, is fully responsible for assigning the certified values and their uncertainties in accordance with ISO Guides 34:2009 and 35:2006.

View certificate